WQ系列泵的特點

●采用大流道抗堵塞水力部件設計．大大提高污物通過能力．能有效地通過泵口徑的3倍纖維物質和直徑為泵口徑約30％的固體顆粒。

●設計合理．配套電機合理．效率高，節能效果顯著。

●機械密封采用雙道串聯密封．材質為硬質耐腐碳化鎢．具有耐用．耐磨等特點．可以使泵安全連續運行8000小時以上。

●泵結構緊湊、體積小，移動方便．安裝方便．無需建泵房．潛入水中即可工作．大大減少工程造價。

●泵油室內設有油水探頭．當水泵側機械密封損壞后．水進入油室．探頭發出信號，對泵實施保護。

●可根據用戶需要配備全自動安全保護控制柜．對泵的漏水、漏電、過載及超溫等進行監控．保證泵運行可靠安全。

●導軌自動耦合安裝系統．給泵的安裝、維修帶來了極大的方便．人可不必為此而進出污水坑。

●浮球開關可根據所需的水位變化，自動控制泵的停啟．無需專人看管。

●在使用揚程范國內保證電機運行不過載。

●根據使用場合電機可采用水套式外循環冷卻系統．能保證電泵在無水(干式)狀態下安全運行。

●安裝方式有固定式自動耦合安裝和移動式自由安裝二種．可滿足不同的使用場合。

FEATURES OF WQ SERIES PUMP

●The design with big flow-path block-resisting hydraulic parts greatly enhance the capacity to let sewage effectively passing through, including the fiber substances of a volume 3 times the aperture of the pump and the solid grains of a diameter about 30% of the aperture.

●Reasonable design and fitted motor, high efficiency and a notable energy-saving effect.

●The mechanical seal is duplex seals in series and made of hard alloy anti-corrosive tungsten carbide, features durability, wearability etc. and is capable of making the pump to safely and continually work for more than 8000h.

●The pump is compact in the structure, small in the volume, easily moved and conveniently mounted and, for work, only needs to submerge into water without a pump house, greatly lowering the engineering cost.

●An oil-water probe set inside of the oil room of the pump will produce a signal to protect the pump once water gets into the room due to the damage of the mechanical seal on the pump side.

●A full-auto safety and protective control cabinet can be fitted upon the need of users to monitor water leak, current leak, overload, temperature surpassing etc. so as to ensure the pump to reliably and safely work.

●Guide-rail auto-coupling installation system makes pump installation and repair greatly convenient and people no need to get in and out of a sewage pool.

●The float switch can automatically control the pump to start and stop in accordance with the required water level variations.

●No overload will be produced with the motor when it runs within the head range for use.

●A water chamber outside circulated cooling system can be used upon the place where the pump is used to ensure it to safely run in the non-water (dry type) state.

●Two installation modes: fixed auto-coupling and movable free installations, meeting with the different places for use.

移動式安裝Movable installation

自動耦合式安裝Auto-coupling installation