產品概述

    潛水排污泵系列是我公司引進國外先進技術的基礎上．結合國內水泵的使用特點而研制成功的新一代泵類產品．具有節能效果顯著、防纏繞、無堵塞、自動安裝和自動控制等特點。在排送固體顆粒和長纖維垃圾方面．具有獨特效果。

    該系列泵采用獨特葉輪結構和新型機械密封．能有效地輸送含有固體物和長纖維。葉輪與傳統葉輪相比，該泵葉輪采用單流道或雙流道形式．它類似于一截面大小相同的彎管．具有非常好的過流性．配以合理的蝸室．使得該泵具有效率高、葉輪經動靜平衡試驗．使泵在運行中穩定可靠。

    該系列泵水力性能先進、高效。結構多樣．安裝方式多樣．簡化泵站．節約投資。

該系列水泵依據JB/T5118-2001標準制造。

GENERAL OF THE PRODUCT

    The sewage pump series is a new generation product successfully developed in this Co. on the basis of the introduced foreign advanced know-how and the features of use of the domestic water pumps and features a no-table energy-saving effect, wrapping-proof, non-block, auto installation and control, and an unique effect on the drainage of solid grains and long fiber rubbish.

    This series pump uses an unique impeller structure and a new-style mechanical seal and can effectively transport those media containing solids and long fibers. Compared with the conventional impeller, the impeller with this pump uses a form of single or dual flow-path, similar to an elbow of the same section and of an extremely good flow-through performance, and, fitted with a reasonable turbine room, this pump cam work very effectively and, via the dynamic and static balancing test on the impeller, run stably and reliably.

    This series pump holds an advanced hydraulic performance, high efficiency, multiple structures and installation modes, simplifying the pump station and saving the investment.

    This water pump is made according to JB/5118-2001.

使用條件

●介質溫度不超過60℃，重度1.0～1.3Kg/dm³．PH值在5～9范圍內。

●無內自流循環冷卻系統的泵．電機部分露出液面不超過1/3。

●一般情況下．泵必須在使用揚程范圍內使用．保證電機不過載．如需在全揚程范圍使用．應在訂貨時另行注明，以便廠家制造。

●在運行過程中泵電機電流不得超過電機的額定電流。

CONDITIONS FOR USE

●Medium temperature not over 60℃, weight density 1.0-1.3Kg/dm³, PH value within 5-9.

●Pump of a circulated cooling system without internal self-flow, the portion out of the liquid surface of the motor not over 1/3.

●The pump has to be used within the range of the head for use, in general, to make sure of the motor without overloaded. Please make a note at order if desired to use in the full head range so as for the manufacturer to make.

●The current of the pump's motor should not be over the rated current of the motor in running.